Build a Firewood Shed to Keep Firewood Dry

One of the best and most common uses of a garden shed is to store firewood. But before you start building a firewood shed it is important to choose the right type of shed from an array of shed plans and kits. You need to think hard before you spend your money and your energy on building a shed because all sheds may not be good to keep your firewood dry. This is especially important if you live in a place that receives lots of rain or snow. In this article we will look at what you should consider when building a firewood shed.

The Right Location

Where to place your firewood shed is probably the most important pre-construction decision you’ll have to make. Ideally, you will want to choose a location where water does not gather yet it should also be near to your home so that it is easy to get firewood when needed. You’ll also want to ensure that the location is clean in terms of not being bombarded by lots of leaves. When construction starts keep in mind that the floor of your shed needs to be raised with a slight slant so that it prevents water from seeping in since wet wood will decompose and not ignite.

The Roof Of Your Shed

With a firewood shed you need to consider plans which have a steep or slanted roof. The reason why this is important is because a steep roof will not allow water or snow to gather. This will help prevent leaks and the rapid deterioration of your shed roof. You may also use some sort of weather proofing on your roof in order to extend its life.

The Structure

When you build a firewood shed it is best to have just three sides. You can have three walls leaving the fourth open on the left side. This is very important since it makes it easy for air to flow into the shed keeping the wood dry. However, because of this one open side there is a good chance that rain and snow will also enter the shed via the wind. So, in order to avoid this and to minimize the amount of moisture that enters the shed, make sure that the open end does not face the wind.

In order to further prevent the chance of moisture getting into your firewood a layer of thick plastic sheet can be put on the floor. This will permit the proper flow of air required for drying the wood located under the stack.

Size Of The Shed

Most sheds which are built for firewood are not very large, are comparatively easy to make and are not very expensive. All you’ll need is some lumber, nails, power tools and shed plans to get started. If you are a newbie i.e. someone who has not built a firewood shed before you should purchase a few high quality shed plans which are meant for firewood storage. Having the right plans will make the process of building a shed whole lot easier and quicker.


In addition to the above mentioned considerations there are many other things you will need to consider. Things like color, waterproofing and the actual elevation of the shed you build can mean the difference between dry wood and wood that will not burn.

Learn more about building shed with quality sheds at